PRODUCTS
STRIP STEEL| º | All Tempers |
| º | Shim Steel |
| º | Hot Roll Pickled & Oiled |
| º | Cold Rolled Sheet |
SPRING STEEL
| º | Annealed and Tempered |
| º | Straight Lengths & Coils |
FLAT WIRE
BAR STEEL
| º | Cold Finished |
| º | Hot Rolled |
HOT ROLLED
SERVICES
SLITTINGEDGE CONDITIONING
SKIVING
SHEARING
CUT TO LENGTH
BLANKING
SAW CUTTING
BURNING
Expanded Metal Grating
Flattened Expanded Metal
Standard Expanded Metal
Carbon Steel
| Style Designation In. No. | Wt. Lb. Per Sq. Ft. | U.S. Std. Gage | Standard Size Sheets Feet Width lgth. | Normal Size Mesh Center to Center of Bridges (in inches) Width Lgth. | Size Strands Inches) Thickness Width | Number of Diamonds In 12 in. Width | |||
| ¼ | -20 | .86 | 20 | 4 x 8 | .25 | 1.0 | 036 | 073 | 48 |
| ½ | -18 | .74 | 18 | 4 & 6 x 8 | .462 | 1.2 | 048 | 081 | 26 |
| ½ | -16 | .84 | 16 | 4 & 6 x 8 | .462 | 1.2 | 060 | 078 | 26 |
| ½ | -13 | 1.47 | 13 | 4 & 6 x 8 | .462 | 1.2 | 090 | 091 | 26 |
| ¾ | -16 | .50 | 16 | 4 & 6 x 8 | .923 | 2.0 | 060 | 092 | 13 |
| ¾ | -13 | .80 | 13 | 4 & 6 x 8 | .923 | 2.0 | 090 | 098 | 13 |
| ¾ | -10 | 1.20 | 13 | 4 & 6 x 8 | .923 | 2.0 | 090 | 148 | 13 |
| ¾ | -9 | 1.80 | 10 | 4 & 6 x 8 | .923 | 2.0 | 134 | 148 | 13 |
| 1 | -16 | 44 | 16 | 4 x 8 | 1.00 | 2.4 | 060 | 089 | 12 |
| 1-1/2 | 16 | .40 | 16 | 4 x 8 | 1.33 | 3.0 | 060 | 107 | 9 |
| 1-1/2 | 13 | .60 | 13 | 4 & 6 x 8 | 1.33 | 3.0 | 090 | 107 | 9 |
| 1-1/2 | 10 | .79 | 13 | 4 & 6 x 8 | 1.33 | 3.0 | 090 | 140 | 9 |
| 1-1/2 | 9 | 1.20 | 10 | 4 & 6 x 8 | 1.33 | 3.0 | 134 | 143 | 9 |
| 1-1/2 | 6 | 2.50 | 6 | 4 x 8 | 1.33 | 3.0 | 198 | 203 | 9 |
Expanded Metal Grating
| Style Designation | Wt. Lbs Per Sq. Ft. | Stock Sizes Of Sheets | Normal Size of Mesh Center to Center of Bridges (in inches) Width Lgth. | Size of Strand (in inches) Width Lgth. | Number of Diamonds In 12” Width Lgth. | ||||
| Walkway | 4.27 | 4’ & 6’ x 8’ | 1.412 | 4.00 | .243 | .300 | 8-1/2 | 3 | |
| Skywalk | 3.14 | 4’ & 6’ x 10’ | 2.000 | 6.00 | .243 | .312 | 6 | 2 | |
| 3.0 lb. Grat. | 3.00 | 3’ & 6’3” & 12’6” | 1.333 | 5.33 | .183 | .264 | 9 | 2-1/4 | |
| 4.0 lb. Grat. | 4.00 | 4’, 5’ & 6’ x 8’ | 1.333 | 5.33 | .215 | .300 | 9 | 2-1/4 | |
| 6.25 lb. Grat. | 6.25 | 4’ & 6’ x 4’, 8’, 12’ & 16’ | 1.412 | 5.33 | .312 | .350 | 8-1/2 | 2-1/4 | |
Flattened Expanded Metal
Carbon Steel
| Style Designation In. No. | Wt. Lb. Per Sq. Ft. | U.S. Std. Gage | Standard Size Sheets Feet Width lgth. | Normal Size Mesh Center to Center of Bridges (in inches) Width Lgth. | Size Strands Inches) Thickness Width | Number of Diamonds In 12 in. Width | |||
| ¼ | -20 | 82 | 20 | 4 x 8 | 25 | 1.031 | 029 | 086 | 48 |
| ¼ | -18 | 1.08 | 18 | 4 x 8 | 25 | 1.031 | 042 | 080 | 48 |
| ½ | -18 | 70 | 18 | 3 & 4 x 8 | 462 | 1.26 | 039 | 095 | 26 |
| ½ | -16 | 80 | 16 | 3 & 4 x 8 | 462 | 1.26 | 050 | 089 | 26 |
| ½ | -13 | 1.40 | 13 | 3 & 4 x 8 | 462 | 1.26 | 070 | 111 | 26 |
| ¾ | -16 | 47 | 16 | 3 & 4 x 8 | 923 | 2.12 | 048 | 110 | 13 |
| ¾ | -14 | 63 | 14 | 3 & 4 x 8 | 923 | 2.12 | 061 | 114 | 13 |
| ¾ | -13 | 76 | 13 | 3 & 4 x 8 | 923 | 2.12 | 070 | 137 | 13 |
| ¾ | -9 | 1.71 | 10 | 3 & 4 x 8 | 923 | 2.12 | 120 | 157 | 13 |
| 1-1/2 | -16 | 38 | 16 | 3 & 4 x 8 | 1.33 | 3.20 | 048 | 127 | 9 |
| 1-1/2 | -14 | 46 | 14 | 3 & 4 x 8 | 1.33 | 3.20 | 061 | 120 | 9 |
| 1-1/2 | -13 | 57 | 13 | 3 & 4 x 8 | 1.33 | 3.20 | 070 | 130 | 9 |
| 1-1/2 | -9 | 1.14 | 110 | 3 & 4 x 8 | 1.33 | 3.20 | 110 | 165 | 9 |
NOTES
1. Width of sheet is measured in direction of short dimension of diamond (S W D) and length of sheet is measured in direction of long dimension of diamond (L W
D) Orders or inquiries for other than standard size sheets should always show width and length followed by the letters S W D or L W D
EXAMPLE: Size of sheet 23 inches (S W D) x 57 inches (L W D)
2. Special sheets can be cut from standard size sheets. Material will be charged for on basis of full area of stock size sheets required and cutting will be done to size specified to a tolerance plus or minus 1/16 inch. Such sheets will, in all probability, not have smooth edges, a shearing charge will be made.
3. Requirements for other than random shearing (as described in 2 above). Such as smooth edges, irregular shapes, etc., should be submitted to us along with details regarding tolerances, quantity, etc., and if found compatible, quotations will be furnished.
4. All expanded metal grating can be furnished in catwalk sizes. 10 Foot S W D by 2 foot, 2 foot 6 inches and 3 foot L W D.
EXAMPLE: Size of sheet 23 inches (S W D) x 57 inches (L W D)
2. Special sheets can be cut from standard size sheets. Material will be charged for on basis of full area of stock size sheets required and cutting will be done to size specified to a tolerance plus or minus 1/16 inch. Such sheets will, in all probability, not have smooth edges, a shearing charge will be made.
3. Requirements for other than random shearing (as described in 2 above). Such as smooth edges, irregular shapes, etc., should be submitted to us along with details regarding tolerances, quantity, etc., and if found compatible, quotations will be furnished.
4. All expanded metal grating can be furnished in catwalk sizes. 10 Foot S W D by 2 foot, 2 foot 6 inches and 3 foot L W D.
|
|
|