PRODUCTS
STRIP STEEL| º | All Tempers |
| º | Shim Steel |
| º | Hot Roll Pickled & Oiled |
| º | Cold Rolled Sheet |
SPRING STEEL
| º | Annealed and Tempered |
| º | Straight Lengths & Coils |
FLAT WIRE
BAR STEEL
| º | Cold Finished |
| º | Hot Rolled |
HOT ROLLED
SERVICES
SLITTINGEDGE CONDITIONING
SKIVING
SHEARING
CUT TO LENGTH
BLANKING
SAW CUTTING
BURNING
Drill Rod - Flats and Squares
STANDARD SIZES AND WEIGHTS
FLATS - POUNDS PER FOOT
| Thickness Inches | WIDTH | 1/8´ | 3/16” | 1/4” | 5/16” | 3/8” | 7/16” | 1/2” | 5/8” | 3/4” | 7/8” | 1” |
| 1/16 | .0266 | .0398 | .0531 | .0664 | .0797 | .0930 | .1063 | .1328 | .1594 | .1859 | .212 | |
| 3/32 | .0398 | .0598 | .0797 | .0996 | .1195 | .1395 | .1594 | |||||
| 1/8 | .0797 | .1063 | .1328 | .1594 | .1859 | .2125 | .2646 | .3188 | .3719 | .425 | ||
| 5/32 | .1328 | .1660 | .1992 | .2324 | .2656 | .3320 | .3984 | .4648 | .531 | |||
| 3/16 | .1594 | .1992 | .2391 | .2789 | .3188 | .3984 | .4781 | .5578 | .637 | |||
| 1/4 | .2656 | .3188 | .3719 | .4250 | .5313 | .6375 | .7438 | .850 | ||||
| 5/16 | .3984 | .4648 | .5313 | .6641 | .7969 | .9297 | 1.063 | |||||
| 3/8 | .5578 | .6375 | .7969 | .9563 | 1.116 | 1.275 | ||||||
| 1/2 | 1.063 | 1.275 | 1.488 | 1.700 |
SQUARES
|
Size Inches |
1/16 | 3/32 | 1/8 | 5/32 | 3/16 | 7/32 | 1/4 | 9/32 | 5/16 | 11/32 | 3/8 | 13/32 |
|
Pounds Per Ft. |
.0132 | .030 | .053 | .083 | .120 | .163 | .212 | .269 | .332 | .402 | .478 | .561 |
|
Size Inches |
7/16 | 15/32 | 1/2 | 9/16 | 5/8 | 11/16 | 3/4 | 13/16 | 7/8 | 15/16 | 1 | |
|
Pounds Per Ft. |
.6508 | .7471 | .8500 | 1.076 | 1.328 | 1.607 | 1.913 | 2.245 | 2.603 | 2.988 | 3.400 |
Available in 3’ and 12’ lengths. Special lengths on application.
Made of special quality water hardening steel.
Noted for true corners, parallel sides and exceptional machinability.
Made of special quality water hardening steel.
Noted for true corners, parallel sides and exceptional machinability.
Typical Analysis
Carbon . . . . . . . . . . . . . . . . . . . . . . . 1.00
Manganese . . . . . . . . . . . . . . . . . . . . .30
Silicon . . . . . . . . . . . . . . . . . . . . . . . . .20
Manganese . . . . . . . . . . . . . . . . . . . . .30
Silicon . . . . . . . . . . . . . . . . . . . . . . . . .20
Heat Treatment
Heat to 1425 degrees - 1500 degrees Fahrenheit. Water quench in sizes to 9/32” sq. or
equivalent. Sizes below 9/32” sq. or equivalent may be quenched in oil.
Standard Manufacturing Tolerances
1.00” to .750” + .0015”, .687” to .250” + .001”, smaller than .250” + .0005”
|
|
|