PRODUCTS
STRIP STEEL| º | All Tempers |
| º | Shim Steel |
| º | Hot Roll Pickled & Oiled |
| º | Cold Rolled Sheet |
SPRING STEEL
| º | Annealed and Tempered |
| º | Straight Lengths & Coils |
FLAT WIRE
BAR STEEL
| º | Cold Finished |
| º | Hot Rolled |
HOT ROLLED
SERVICES
SLITTINGEDGE CONDITIONING
SKIVING
SHEARING
CUT TO LENGTH
BLANKING
SAW CUTTING
BURNING
Alloy Steel Rounds
e.t.d. 150® (Elevated Temperature Drawing)
(Red w/Blue
Stripe)
CHEMISTRY*
| Carbon | 0.40 Min. |
| Manganese | 0.70/1.10 |
| Silicon | 0.15/0.35 |
| Chromium | 0.80/1.20 |
| Molybdenum | 0.15/0.25 |
MECHANICAL PROPERTIES
| Tensile Strength | **150.000 psi Min. |
| Yield Strength (.2% offset) | 130,000 psi Min. |
| Elongation | 10% (Mean) |
| Reduction of Area | 37% (Mean) |
| Machinability | 75% of 1212 |
| Rockwell C Hardness | **32 Min. |
| Brinell Hardness | **302 Min. |
*"e.t.d." 150®" contains additives for improving machinability. These may be Tellurium, Selenium, Sulphur (.06 max.), or others, separately or in combination.
**In the event of disagreement between hardness and tensile strength, the tensile strength shall govern.
**In the event of disagreement between hardness and tensile strength, the tensile strength shall govern.
| MICRO-STRUCTURE | Chiefly acicular ferrite and fine pearlite. Fine grain size 5-8. |
| SIZE RANGE | 7/16” rounds through 3-1/2” |
| TOLERANCES | Rounds: |
| (Tolerances, in decimals | 7/16” to 1-1/2” incl . . . . . . . . . .005” |
| of an inch, provide | Over 1-1/2” to 2-1/2” incl . . . . . . . .006” |
| for undersize variation only.) | Over 2-1/2” to 3-1/2” incl . . . . . . . .007” |
| LENGTH | 11’/13’ |
| EXAMPLE OF USE | Parts you are now heat treating from Rc32 to Rc38. |
GET STRENGTH IN MACHINE PARTS WITHOUT HEAT TREATMENT
| Size | Weight Per Ft. Lbs. | e.t.d. 150 | Size | Weight Per Ft. Lbs. | e.t.d. 150 |
| 7/16 | .511 | 11-13 | 1-9/16 | 6.54 | 11-13 |
| 1/2 | .668 | 11-13 | 1-5/8 | 7.051 | 11-13 |
| 9/16 | .845 | 11-13 | 1-3/4 | 8.178 | 11-13 |
| 5/8 | 1.043 | 11-13 | 1-7/8 | 9.388 | 11-13 |
| 11/16 | 1.262 | 1-15/16 | 10.031 | 11-13 | |
| 3/4 | 1.502 | 11-13 | 2 | 10.680 | 11-13 |
| 13/16 | 1.763 | 11-13 | 2-1/8 | 12.060 | 11-13 |
| 7/8 | 2.045 | 11-13 | 2-3/16 | 12.780 | 11-13 |
| 15/16 | 2.347 | 11-13 | 2-1/4 | 13.520 | 11-13 |
| 1 | 2.670 | 11-13 | 2-3/8 | 15.060 | 11-13 |
| 1-1/16 | 3.015 | 11-13 | 2-1/2 | 16.680 | 11-13 |
| 1-1/8 | 3.80 | 11-13 | 2-5/8 | 18.400 | 11-13 |
| 1-3/16 | 3.766 | 11-13 | 2-3/4 | 20.19 | 11-13 |
| 1-1/4 | 4.172 | 11-13 | 2-7/8 | 22.07 | 11-13 |
| 1-5/16 | 4.600 | 11-13 | 2-15/16 | 23.06 | 11-13 |
| 1-3/8 | 5.049 | 11-13 | 3 | 24.03 | 11-13 |
| 1-7/16 | 5.521 | 11-13 | 3-1/8 | 26.10 | 11-13 |
| 1-1/2 | 6.008 | 11-13 | 3-1/4 | 28.21 | 11-13 |
| 3-3/8 | 30.40 | 11-13 | |||
| 3-1/2 | 32.71 | 11-13 |
|
|
|